The following table is a listing of all G-codes (preparatory commands) supported by the Anilam Crusader II controller
using EIA-274-D off-line programming.
Items marked * are also valid for Anilam format MDI programming:
| G-Code (Preparatory Commands) Listing | ||
|---|---|---|
| G00 | Rapid travel (modal) | |
| G01 | Linear feedrate travel (modal) | |
| G02 | Clockwise circular interpolation (modal) | |
| G03 | Counterclockwise circular interpolation (modal) | |
| G04 | Dwell (equivalent to M00 program stop--nonmodal) | |
| * | G10 | Rapid travel incremental polar move (nonmodal) |
| * | G11 | Feedrate incremental polar move (nonmodal) |
| * | G12 | Rapid travel absolute polar move (nonmodal) |
| * | G13 | Feedrate absolute polar move (nonmodal) |
| G29 | Special function code preceding SUBROUTINE, CALL, DO, LOAD VARIABLE, END, and loading TLO statements | |
| * | G40 | Cancel cutter compensation (modal) |
| * | G41 | Cutter compensation, cutter left (modal) |
| * | G42 | Cutter compensation, cutter right (modal) |
| * | G51 | Polar rotation activate (modal) |
| * | G52 | Polar rotation cancel (modal) |
| * | G53 | Scaling activate (modal) |
| * | G54 | Scaling cancel (modal) |
| G70 | Inch units (modal) | |
| G71 | Metric units (modal) | |
| * | G75 | Frame milling canned cycle (nonmodal) |
| * | G76 | Hole milling canned cycle (nonmodal) |
| * | G77 | Circular pocket milling canned cycle (nonmodal) |
| * | G78 | Rectangular pocket milling canned cycle (nonmodal) |
| * | G79 | Bolt hole drilling canned cycle (nonmodal) |
| * | G80 | Cancel G80-series canned Z-axis cycles (modal) |
| * | G81 | Drill canned cycle (modal) |
| * | G82 | Counterbore/countersink canned cycle (modal) |
| * | G83 | Peck drill canned cycle (modal) |
| * | G85 | Bore canned cycle (modal) |
| * | G86 | Bore & program stop canned cycle (modal) |
| * | G87 | Chip breaker drill canned cycle (modal) |
| * | G89 | Bore with dwell canned cycle (modal) |
| G90 | Absolute positioning (modal) | |
| G91 | Incremental positioning (modal) | |
| Auxiliary / Miscellaneous Code Listing | ||
|---|---|---|
| Aux / Misc Code | Function | |
| 100 | Reverses sign of X-axis dimensions for mirroring | |
| 200 | Reverses sign of Y-axis dimensions for mirroring | |
| 300 | Reverses both X and Y axes dimension | |
| 400 | Reverses sign of Z-axis dimensions for mirroring | |
| 500 | Reverses both X and Z axes dimension | |
| 600 | Reverses both Y and Z axes dimension | |
| 700 | Reverses X, Y and Z axes dimension | |
| 800 | Cancels mirror imaging sign reversals | |
| 1000 | Deceleration override for tangent tool path blocks | |
| 1101 | Absolute zero (origin) shift | |
| 2000 | Cancel 1000 deceleration override | |
Copyright © 2003 George C. Stanton & Bill Hemphill
All Rights Reserved
Last updated on Jan. 18, 2003 by Bill Hemphill