|
|
|
|
|
| ||
|---|---|---|
|
Assignments are generally available online in
PDF format. The Adobe Acrobat Reader browser plug-in is free. |
|
|
|
|
 |
||
| Notes for Current Term: Summer 2017, First Session ENTC 2170 CADD is a four credit hour class. The first part of each class meeting will typically be used for lecture/demonstration; the remainder of the class will be used for as an open laboratory. Homework and classroom exercises are due on the assigned date at the end of class. AutoCAD is available only in the Wilson-Wallis CADD labs. Students may use personal laptops loaded with the free AutoCAD Classic program; connect via the ETSU Wireless Network. It remains each student's responsibility to complete all assignments by any noted due date by attending class as scheduled and using the lab facilities during open lab times as required.  |
||
| Most assignments are available for downloading &/or viewing/printing from the appropriate assignment page. Many are stored in Adobe PDF format and require the use of the free Adobe Acrobat Reader. Click a hotlink to download the latest version. | |
 |
|
| Section 1: Fundamentals of Engineering Drawing & Sketching | |||
|---|---|---|---|
| Assignment Number |
Assignment Description |
*Date Due | Points |
| Assignment 1.1 | Lines, Angles & Scales | TBD | 5 |
| Assignment 1.2 | Orthgonal Projections & Views | TBD | 5 |
| Assignment 1.3 | Sketching, Aux. Views, & Surface Area | TBD | 5 |
| *Due Dates Subject to Change | |||
| Section 2: Fundamentals of 2D CADD (Intro to AutoCAD) | |||
|---|---|---|---|
| Assignment Number |
Assignment Description |
*Date Due | Points |
| Assignment 2.1 | Simple Shapes & Coordinate Systems | TBD | 5 |
| Assignment 2.2 | Deploying Basic Drawing Elements (Points, Lines, & Text) |
TBD | 5 |
| Assignment 2.3 | Geometric Construction & Blocks (Object Snaps and Object Modifications) |
TBD | 5 |
| Assignment 2.4 | Wrench: Adventures in Shapes, Fillets & Symmetry |
TBD | 5 |
| Assignment 2.5 | Geneva Gear (Polar Arrays & Dimensioning) |
TBD | 5 |
| Assignment 2.6 | Problem Solving with CADD | TBD | 10 |
| Assignment 2.7 | Tennessee State Flag | TBD | 5 |
| Assignment 2.8 | Bracket, Test Tube Holder | TBD | 10 |
| *Due Dates Subject to Change | |||
| Section 3: Introduction to 3D Modeling (Intro to Rhino 3D) | |||
|---|---|---|---|
| Assignment Number |
Assignment Description |
*Date Due | Points |
| Assignment 3.1 | Intro to 3D modeling with Rhino 3D | TBD | 5 |
| Assignment 3.2 | Importing 2D CAD Data; Extrusions and Revolves |
TBD | 5 |
| Assignment 3.3 | 2D & 3D Views of U-Clamp Assy | TBD | 10 |
| Assignment 3.4 | 3D Test Tube Holder Extrusions, "Cookie Cutters" & Drills |
TBD | 10 + 5(EC) |
| Assignment 3.5 | Deskset Design Image Tracing & Textures |
TBD | 10 |
| Assignment 3.6 | 3D Lofted Surfaces and Solids 45° Rectangular to Circular Transition |
TBD | 10 |
| Assignment 3.7 | From Art to Part (Stereolithography) [By instructor permission only] |
TBD | 10 (EC) |
| *Due Dates Subject to Change | |||
| NOTE: 2D & 3D Modeling Assignment Check-offs: All assignments should be submitted to your instructor no later than Thursday, July 6th by 7:00 p.m. |
|||
|
|
|
|
| Web site Copyright © 2000-2017 by Bill Hemphill All Rights Reserved. | |
| 2017June07 | |